manualshive.com logo in svg

Bioness VEC-1000, Руководство для клиницистов

Поделиться
Скачать
Bioness VEC-1000 Скачать руководство пользователя страница 46

37

Chapter 6 - Advanced Training Features

Figure 6-13: Treadmill Connection Error

Treadmill Controls

After establishing connection with the treadmill, the Treadmill Controls Tab on the Vector software can 
be used to start, stop, and modify settings on the treadmill. Speed, incline, and belt direction can be 
adjusted from the PC or Remote Control. See Figure 6-14.

Note: The Treadmill Control Tab will remain enabled on both the PC and Remote Control at all times, 
regardless of which device is being used to control the trolley.

Figure 6-14: Training Session Screen with Treadmill Controls Enabled 

Note: With an established treadmill connection, the treadmill can be operated from the PC, Remote 
Control, or main treadmill interface. However, it is recommended to keep the treadmill on its main menu 
and control it primarily though the Vector software while connected.

1.  To initiate a treadmill training session, press the Start button. See Figure 6-14.

Note: If the system does not detect a minimum of 10 pounds on the spreader bar, an error will be 
displayed and the treadmill will not start. See Figure 6-15.

Start

Содержание VEC-1000
















































































































Отзывы:

Нет отзывов

Бренды по названию

Популярные бренды

Загрузить еще бренды