manualshive.com logo in svg

Bioness VEC-1000, Руководство для клиницистов

Поделиться
Скачать
Bioness VEC-1000 Скачать руководство пользователя страница 14

5

Chapter 2 - Safety Information

Internet. Modification of the network can void the warranty and may affect equipment performance.

•  The Vector PC and Remote Control should be used by trained healthcare professionals only 

outside of the patient environment and are to be used for operation of the Vector system only. Any 
modification to the operating systems, software, or configuration can void the warranty and may 
affect equipment performance.

•  The Vector PC and database are secured using a username and password. Each user of 

the Vector system should keep the password secure and ensure that the system is not left 
unattended.

Environmental Conditions that Affect Use 

 

Radio Frequency (RF) Communication Information 

This equipment generates, uses, and can radiate RF energy and, if not installed and used in accordance 
with the instructions, may cause harmful interference to radio communications. However, there is no 
guarantee that interference will not occur in a particular installation. If this equipment does cause harmful 
interference to radio or television reception, which can be determined by turning the equipment off and 
on, the user is encouraged to try to correct the interference by one or more of the following measures: 

 

Reorient or relocate the receiving antenna 

 

Increase the separation between the equipment and receiver 

 

Consult the dealer or an experienced radio/TV technician for assistance 

The antenna for each transmitter must not be co-located or operating in conjunction with any other 
antenna or transmitter 

Portable and mobile RF communications equipment may affect the Vector Elite System

Electromagnetic Emissions

The Vector Elite System needs special precautions regarding electromagnetic compatibility (EMC). The 
system needs to be installed and put into service according to the EMC information provided in this manual.

Warnings

•  Do not use the Vector Elite System within three feet (1 meter) of shortwave or microwave therapy 

equipment. Such equipment may produce instability in the dynamic function of the unit.

•  Portable RF communications equipment (including peripherals such as antenna cables and 

external antennas) should be used no closer than 30cm (12 inches) to any part of the Vector 
Elite System, including cables specified by the manufacturer. Otherwise, degradation of the 
performance of this equipment could result.

•  The Vector Elite System should not be used adjacent with other equipment. If adjacent use 

is necessary, the equipment or system should be observed to verify normal operation in the 
configuration in which it will be used.

Содержание VEC-1000
















































































































Отзывы:

Нет отзывов

Бренды по названию

Популярные бренды

Загрузить еще бренды