manualshive.com logo in svg

Bioness VEC-1000, Руководство для клиницистов

Поделиться
Скачать
Bioness VEC-1000 Скачать руководство пользователя страница 33

24

Clinician's Guide

Starting a Training Session

A clinician or assistant must stay by the PC Computer or Remote Control to operate the Vector Elite 
system software controls during training sessions. A training session must be launched from the PC 
Computer and not from the Remote Control. 

1.  From the Main Menu screen, press Patient Training. 

2.  Select desired patient's name.

3.  Press the Start Training button to open the Training Session screen.

4.  To enable the Training Controls section, use manual control winch up button to create tension in 

the Support Rope and patient harness shoulder straps. Once the Vector Elite system has detected 
a load of at least 10 lbs. (4.5 kgs.), the Training Controls section will be enabled for use.

5.  The default setting for dynamic unloading is 10 lbs (4.5 kgs). To adjust the setting use the plus (+)  

or minus (-) buttons. The revised value will display in the text between the buttons. This value must 
be within 75 lbs. (34 kgs.) of the current unloading value in order to activate DBWS.

6.  The default mode for Fall Prevention is Distance with a Fall Limit of 4 inches (10 cm). Use the 

drop-down menu to change the Fall Prevention mode, or use the plus (+) or minus (-) buttons to 
adjust the Fall Limit setting. Press the Save button to save the revised Fall Prevention mode.

7.  To activate Trolley Tracking, apply at least 10 lbs. (4.5 kgs.) of load by using the manual Manual 

Controls to winch the Support Rope and Spreader Bar, and press the Trolley Tracking button. The 
button will change from green to red. See Figure 5-19.

8.  To activate Dynamic Body Weight Support, press the DBWS button. The button will change green 

to red indicating that the feature is turned on. See Figure 5-19. 

Figure 5-15: Training Session Screen (Trolley Tracking and DBWS Active) 

Содержание VEC-1000
















































































































Отзывы:

Нет отзывов

Бренды по названию

Популярные бренды

Загрузить еще бренды