Bioness VEC-1000, Руководство для клиницистов

Страница: 31 / 111

22
Clinician's Guide
XXXXXX
XXXXXX
Remote Control
Serial Number PC Serial Number
Trolley Serial
Number
Emergency Stop and Emergency Lower Buttons
In emergency situations, the clinician may use the Emergency Lower or Emergency Stop buttons, found
at the bottom of the Training Session screen. See Figure 5-3.
Emergency Stop Button
The Emergency Stop button stops the trolley and locks it into one position. When the
system is in Static Unload Mode, the position of the rope will be maintained regardless
of patient movement.
Emergency Lower Button
If a patient becomes medically unstable, press the Emergency Lower button, and the
system will continue to winch down the rope, with controlled velocity, until the patient
has reached the ground or until the dynamic unload force goes below the default value.
Preparing for a Training Session
If the clinician is using an open track, place markings on the floor to designate the end of the track, if the
track does not terminate at a wall or other obstruction. Instruct the patient to stop prior to the marking,
or else the trolley will hit the end of track Bumpers. If the patient hits a bumper, they should turn around
and continue their training in the reverse direction on the track.
For multi-trolley configured systems make sure the correct Computer and Remote Control are being used
before starting a training session. Determine which trolley the patient will use and find the trolley serial
number printed on the trolley label. The corresponding computer will have the trolley serial number printed
on a label located in the upper right corner of the screen. The corresponding remote control will have
the trolley serial number printed on a label located on the back of the remote control. See Figure 5-13.
Figure 5-13: Serial Number Locations