manualshive.com logo in svg

Bioness VEC-1000, Руководство для клиницистов

Поделиться
Скачать
Bioness VEC-1000 Скачать руководство пользователя страница 42

33

Chapter 6 - Advanced Training Features

Figure 6-5: Advanced Trolley Tracking Range Tab

Figure 6-6: 

Restricted Trolley 

Range Active

Note: The target speed can be adjusted at any time, including before and after the patient begins 
walking.

Trolley Range

This feature allows the clinician to establish a virtual boundary for the trolley to operate within. This is 
accomplished by setting a limit on the distance that the trolley can travel from a specified location on 
the track.

1.  Select the Range tab. See Figure 6-5. 

2.  Select the option to Restrict Trolley Range. See Figure 6-6.

3.  Use the plus (+) and minus (-) buttons to adjust the range. See Figure 6-6.

Note: The range value applies to forward and backward motion of the trolley (e.g. setting the range to 
5 ft allows the trolley to move forward 5 ft and backward 5 ft for a total of 10 ft of movement.

Advanced Body Weight Support

Advanced Body Weight Support can be used to add automation to the unloading assistance provided 
by the Vector Elite system during activities such as overground gait training and Sit-to-stand exercises.

Gait Smoothing

This feature automatically adjusts the set unloading based on changes in the patient’s vertical 
displacement. If the patient’s vertical displacement during gait activities exceeds a prespecified 
range (0.06 m/2.36 in), the Vector Elite system will automatically increase the unloading to reduce 
the patient’s vertical displacement. If the patient’s vertical displacement is less than the prespecified 
range, the unloading automatically decreases to provide more of a challenge for the patient. Gait 

Содержание VEC-1000
















































































































Отзывы:

Нет отзывов

Бренды по названию

Популярные бренды

Загрузить еще бренды