manualshive.com logo in svg

Bioness VEC-1000, Руководство для клиницистов

Поделиться
Скачать
Bioness VEC-1000 Скачать руководство пользователя страница 15

6

Clinician's Guide

•  The use of accessories, transducers, and cables other than those specified (with the exception of 

transducers and cables sold by the manufacturer of the Vector Elite System as replacement parts 
for internal components) may result in increased emissions or decreased immunity of the Vector 
Elite System.

•  The Vector Elite System may be interfered with by other equipment, even if that other equipment 

complies with CISPR (International Special Committee on Radio Interference, International 
Electrotechnical Commission) emission requirements.

•  The emissions characteristics of this equipment make it suitable for use in industrial areas and 

hospitals (CISPR 11 class A). If it is used in a residential environment (for which CISPR 11 class 
B is normally required) this equipment might not offer adequate protection to radio-frequency 
communication services. The user might need to take mitigation measures, such as relocating or 
re-orienting the equipment.

Incident Reporting

Any serious incident that has occurred in relation to the device should be reported to the manufacturer 
and the competent authority of the Member State in which the user and/or patient is established if within 
the European Union.

Содержание VEC-1000
















































































































Отзывы:

Нет отзывов

Бренды по названию

Популярные бренды

Загрузить еще бренды