manualshive.com logo in svg

Bioness VEC-1000, Руководство для клиницистов

Поделиться
Скачать
Bioness VEC-1000 Скачать руководство пользователя страница 32

23

Chapter 5: Patient Training Menu

Attaching a Patient Harness to the Spreader Bar

After the patient has been securely fitted in the harness, attach the harness to the spreader bar. Refer to  
Chapter 3 for patient harness fitting instructions. 

1.  Secure the patient.

2.  Use the manual control winch down button to lower the rope with spreader bar attached.

3.  The spreader bar provides three attachment points to attach a patient harness. The selection  

of the attachment point depends on the size of the patient. Connect the patient harness to the  
outermost attachment points for broader patients, and to the innermost points for thinner patients. 
See Figure 5-14.

4.  Connect the spreader bar carabiners to the D-rings on the patient harness shoulder straps. Check 

to make sure the connection is secure.

5.  Use the manual control winch up button to slowly raise the Support Rope until there is tension in 

the rope and patient harness shoulder straps.

Note: When using the manual control buttons with a patient attached to the spreader bar, let the patient 
know that the trolley is about to be moved.

Figure 5-14: Spreader Bar Attachment Points

Attachment points for thinner patients

Attachment points for broader patients

Содержание VEC-1000
















































































































Отзывы:

Нет отзывов

Бренды по названию

Популярные бренды

Загрузить еще бренды