Biocare iM 12 Скачать руководство пользователя страница 70

Страница: 70 / 196

Chapter 6 Parameter Monitoring

--58--

User Manual of Veterinary Monitor



Resp Lead Setup

Select [Resp Lead]: I and II. It allows selecting the desired lead to meet different clinical demands for

optimal respiratory waves.

Attention



In order to obtain optimal respiratory waves, RA and LA electrodes should be kept level when I-lead

is selected for resp measure, and RA and LL electrodes should be diagonally kept when II-lead is

selected.



Detect. Mode Setup

Select [Detect. Mode]: Auto and Manual. Respiratory wave calculation mode can be set.



Auto Mode

In this mode, the monitor will automatically adjust the detection level according to waveform height and

whether cardiac artifact is existent, but the detection level dotted line is not displayed on the respiratory

waveforms.

[Auto] mode is recommended when respiratory rate is not close to the heart rate or animals are actively

respiration.



Manual Mode

In the Manual mode, users are required to set the respiratory detection level. Select [Upper Line] and

[Lower Line] to manually relocate the detection level dotted line on the respiratory waveforms. Once

determined, the detection level will not automatically adapt to different depths of respiration. Thus,

users are required to readjust the detection level to adapt to changes in the depths of respiration

according to actual conditions.

Users can directly click

and

in the window to raise or lower the upper/lower dotted lines if

the touch screen function is configured. When the upper/lower dotted lines of the respiratory waves are

blocked by [Resp Setup] Window, users can click the title panel on the window to drag it until the

upper/lower dotted lines can be relocated.

Attention



In case the respiratory waves are not displayed on the respiratory oxygenation diagram interface or

main screen, the detection level is still not adjustable even if the [Detect. Mode] is set Manual.



Respiration Alarm Parameter Setup

Select [Alarm Setup>>] to enter the menu [PAR.Alarm], then users can set RR alarm attributes, including:

Alarm Switch, Alarm Higher/Lower Limit, Alarm Level and Alarm Record On/Off.

6.3 PR

6.3.1 PR General Description

The mechanical movement of the heart causes pulsation of arteries, and the PR (pulse rate) can be obtained by

measuring this pulsation. The PR numerical value can be obtained through SpO

or any arterial pressure (IBP).

Содержание iM 12





































































































































































































Результаты поиска

Содержание iM 12

Отзывы:

Похожие инструкции для iM 12

Бренды по названию

Популярные бренды

Biocare iM 12, Руководство пользователя

Результаты поиска

Содержание iM 12

Отзывы:

Похожие инструкции для iM 12

Бренды по названию

Популярные бренды