Biocare iM 12 Скачать руководство пользователя страница 23

Страница: 23 / 196

Chapter 2 Overview

User Manual of Veterinary Monitor

--11--

Chapter 2 Overview

2.1 Brief Introduction

2.1.1 Applicability

This series of monitors can be used in monitoring or measuring the electrocardiogram (ECG), non-invasive blood

pressure (NIBP), body temperature (Temp), respiration (Resp), EtCO

(optional), invasive blood pressure (IBP)

(optional), cardiac output (C.O.)(optional) and Anesthetic gas module (AG) (optional) for a single vet. The

monitoring data can be displayed, reviewed, stored and sent to another device.

This series of monitors are expected to be used in a highly-efficient sensitive nursing environment, including (but

not restricted to) operating room monitoring, post- recovery, critical care, operative intensive care, respiratory

intensive care, cardiac care, pharmacodynamic intensive care, etc.

Warning



This series of monitors require use by specialized clinicians or under their guidance. The monitor

user must have received sufficient associated training. Any unauthorized or untrained person is

prohibited from operating the monitor.



C.O. monitoring is restricted to animals > 20 kg only.

This series of monitors have the following monitoring functions:



ECG: the heart rate, three- and seven-channel ECG waveforms, ST segment analysis, and arrhythmia

analysis.



Resp: respiratory rate and wave.



Temp: dual-channel Temp data.



SpO

: oxygen saturation, pulse rate and pulse wave.



Pulse rate (PR): pulse rate in one minute.



NIBP: contractive pressure, diastolic pressure and mean blood pressure.



IBP (optional): contractive pressure, diastolic pressure and mean blood pressure.



C.O. (optional): the cardiac output and blood temperature.



(optional): the CO

concentration in the respiratory paths and airway respiratory rate.



Anesthetic gas (AG) (optional): CO

[AG], N

O, AA, O

;



A central monitoring network system can be constructed as needed.

2.1.2 Contraindications

None

2.2 Configuration Composition

This series of monitors are composed of a mainframe and corresponding functional accessories (including

ECG lead cables, blood pressure cuffs, IBP monitoring sensors (optional), blood oxygen probes, body

temperature probes (optional), C.O. cables(optional), CO

measurement assembles (optional), and Anesthetic

gas measurement assembles (optional) etc).

Содержание iM 12





































































































































































































Результаты поиска

Содержание iM 12

Отзывы:

Похожие инструкции для iM 12

Бренды по названию

Популярные бренды

Biocare iM 12, Руководство пользователя

Результаты поиска

Содержание iM 12

Отзывы:

Похожие инструкции для iM 12

Бренды по названию

Популярные бренды