Biocare iM 12 Скачать руководство пользователя страница 153

Страница: 153 / 196

Chapter 14 Maintenance

User Manual of Veterinary Monitor

--141--

Auto Screen Layout:

On or Off

It is used for setting to display that the module is turned off. When a sensor

for the parameter is not activated is inserted on the screen configuration, the system will automatically

display the data and waveform of the parameter if this option is activated. If this option is deactivated, the

current screen layout will not change, but there will be a prompt ‗XX not be choosed to display‘ appearing on

the lower part of screen.

Special: if Resp parameter is not activated in screen configuration, the screen will always

display the message

‗

Resp cannot be choosed to display

‘

instead of the Resp data and waveform if the ECG lead is

inserted, no matter if the

‗

Auto Screen Layout

‗

is set to On or Off.

14.6 Demo Model

Select [Main Menu]-[Maintenance]-[Demonstrate]. Input the demo password to enter the demo mode.

Attention



The demo mode is used for factory demonstration or hospital training purposes. This function is

provided with password protection. During demonstration, all waveforms and data are virtual, and

some menus and functions are disabled

14.7 Monitor System Information

Select [Main Menu]-[Maintenance]-[System Info>>]. From this window, you may view information such as the

startup time and last startup time of the machine, system compiles time, machine ID and configuration info.

Select [Configuration Info>>] from the system information window. A window as shown in Figure 14.2 will pop

up.

Figure 14.2 Configuration Information

This window displays the module configuration, including: Module Name, Hardware Version and Software

Version.

Содержание iM 12





































































































































































































Результаты поиска

Содержание iM 12

Отзывы:

Похожие инструкции для iM 12

Бренды по названию

Популярные бренды

Biocare iM 12, Руководство пользователя

Результаты поиска

Содержание iM 12

Отзывы:

Похожие инструкции для iM 12

Бренды по названию

Популярные бренды