Binder 9020-0146 Скачать руководство пользователя

Страница: 69 / 71

MK (E3) 07/2009

page 69/70

3.3

Measures to be taken in case of skin contact or release into the atmosphere

Maßnahmen

bei Personenkontakt oder Freisetzung:

____________________________________________________________________________

b) ____________________________________________________________________________

c)

____________________________________________________________________________

3.4

Other important information that must be taken into account

Weitere zu beachtende und

wichtige Informationen:

____________________________________________________________________________

b) ____________________________________________________________________________

c)

____________________________________________________________________________

Declaration on the risk of these substances (please checkmark the applicable items)

Erklärung zur Gefährlichkeit der Stoffe (bitte Zutreffendes ankreuzen) :

4.1 For non toxic, non radioactive, biologically harmless materials

für nicht giftige, nicht radioak-

tive, biologisch ungefährliche Stoffe:

We herewith guarantee that the above-mentioned unit / component part… /

Wir versichern, dass o.g.

Gerät/Bauteil...

Has not been exposed to or contains any toxic or otherwise hazardous substances /

weder giftige noch

sonstige gefährliche Stoffe enthält

oder solche anhaften.

That eventually generated reaction products are non-toxic and also do not represent a hazard /

auch

evtl. entstandene Reaktionsprodukte weder giftig sind noch sonst eine Gefährdung darstellen.

Eventual residues of hazardous substances have been removed /

evtl. Rückstände von Gefahrstoffen entfernt

wurden.

4.2 For toxic, radioactive, biologically harmful or hazardous substances, or any other hazard-

ous materials

für giftige, radioaktive, biologisch bedenkliche bzw. gefährliche Stoffe oder anderweitig ge-

fährliche Stoffe.

We herewith guarantee that … /

Wir versichern, dass …

The hazardous substances, which have come into contact with the above-mentioned equip-

ment/component part, have been completely listed under item 3.1 and that all information in this re-
gard is complete /

die gefährlichen Stoffe, die mit dem o.g. Gerät/Bauteil in Kontakt kamen, in 3.1 aufgelistet sind und alle

Angaben vollständig sind.

That the unit /component part has not been in contact with radioactivity /

das Gerät/Bauteil nicht mit Radioak-

tivität in Berührung kam

Kind of transport / transporter

Transportweg/Spediteur:

Transport by (means and name of transport company, etc.)

Versendung durch (Name Spediteur o.ä.)

__________________________________________________________________________________

Date of dispatch to BINDER GmbH /

Tag der Absendung an BINDER GmbH

___________________________________________________________________________________

Содержание 9020-0146








































































Результаты поиска

Содержание 9020-0146

Отзывы:

Похожие инструкции для 9020-0146

Бренды по названию

Популярные бренды

Binder 9020-0146, Руководство по эксплуатации

Результаты поиска

Содержание 9020-0146

Отзывы:

Похожие инструкции для 9020-0146

Бренды по названию

Популярные бренды