Binder 9020-0146 Скачать руководство пользователя | Manualshive

Страница: 6 / 71

background image

MK (E3) 07/2009

page 6/70

Dear customer,

For the correct operation of the temperature test chamber for natural simulation MK, it is imperative that
you read this operating manual completely and carefully and observe the given instructions.

1.

Safety

This operating manual is part of the scope of delivery. Always keep it at hand.

To avoid injuries and damage observe the safety instructions of the operating manual.

WARNING

Failure to observe the safety instructions.

Serious injuries and unit damage.

¾

Observe the safety instructions in this operating manual

¾

Carefully read the complete operating instructions of the temperature test chamber for

natural simulation MK

1.1

Legal considerations

This operating manual contains information necessary for the intended use, correct installation, start-up
and operation, and for the maintenance of the unit.

Understanding and observing the instructions in this operating manual are prerequisites for hazard-free
use and safety during operation and maintenance.

This operating manual cannot cover all conceivable applications. If you would like additional information,
or if special problems arise that you feel are not sufficiently addressed in this manual, please ask your
dealer or contact us directly.

Furthermore, we emphasize that the contents of this operating manual are not part of an earlier or exist-
ing agreement, promise, or legal relationship, nor do they modify such a relationship. All obligations on
the part of BINDER derive from the respective purchase contract, which also contains the entire and ex-
clusively valid statement of warranty administration. The statements in this manual neither augment nor
restrict the contractual warranty provisions.

1.2

Structure of the safety instructions

In this operating manual, the following harmonized denominations and symbols indicate dangerous situa-
tions following the harmonization of ISO 3864-2 and ANSI Z535.6.

1.2.1 Signal word panel

Depending on the seriousness and probability of the consequences, dangers are identified with a signal
word, the corresponding safety color, and if appropriate, the safety alert symbol.

DANGER

Indicates an imminently hazardous situation that, if not avoided, will result in death or serious (irreversi-
ble) injury.

WARNING

Indicates a potentially hazardous situation which, if not avoided, could result in death or serious (irre-
versible) injury

«
...
4
5
6
7
8
...
»

Содержание 9020-0146








































































Отзывы:

Нет отзывов

Похожие инструкции для 9020-0146

Бренд: ExpotechUSA Страницы: 6

Бренды по названию

0 1 2 3 4 5 6 7 8 9 A B C D E F G H I J K L M N O P Q R S T U V W X Y Z

Популярные бренды

Загрузить еще бренды