Binder 9020-0146, Руководство по эксплуатации

Страница: 11 / 71

MK (E3) 07/2009 page 11/70
DANGER
Electrical hazard.
Danger of death.
∅
The unit must NOT become wet during operation or maintenance.
The temperature test chambers have been produced in accordance with VDE regulations and were rou-
tinely tested in accordance to VDE 0411-1 (IEC 61010-1).
CAUTION
The inner chamber, the door window and the access ports will become hot during
operation.
Danger of burning.
∅
Do NOT touch the inner surfaces, the door window, the access ports, or the charging
material during operation.
WARNING
Stability hazard.
Danger of injury.
Damage to the unit and the charging material.
Housing cover breakaway.
∅
Do NOT climb the lower housing cover.
∅
Do NOT load the lower housing cover with heavy objects while the unit door is open.
1.6 Intended use
Temperature test chambers MK for natural simulation are suitable for temperature treatment of solid or
pulverized charging material, as well as bulk material, using the supply of heat or cold. They are suitable
for harmless materials. A mixture of any component of the charging material with air must NOT be explo-
sive. The operating temperature must lie below the flash point or below the sublimation point of the charg-
ing material.
Other applications are not approved.
Temperature test chambers for natural simulation MK can be used for drying purposes but are specially
designed for solving all the problems which occur during material and ageing tests.
Do NOT use the unit for drying purpose, especially if greater quantities of steam leading to condensation
will be set free.
Observing the instructions in this operating manual and conducting regular maintenance work
(chap. 15) is part of the intended use.