Binder 9020-0146, Руководство по эксплуатации

Страница: 28 / 71

MK (E3) 07/2009 page 28/70
8. Manual Mode
In Manual Mode (HAND) you can enter a temperature set-point and the switching-state of up to 8 opera-
tion lines. Operation line 1 is used to control the bedew protection (chap. 10). Operation lines 2 to 5 can
be used to switch any device connected to the zero-voltage relay outputs (DIN sockets (8) and (9), chap.
14.6). The other operation lines are non-functional. All settings remain valid for Manual Mode (HAND)
until the next manual change, also if the unit had been switched off or in case of toggling to Idle Mode or
Program Mode (AUTO).
8.1 Set-point entry
W X
08:43:55 15.12.07
CONFIG VIEW-> PGM
TEMP
0.0
26.8
°C
HAND
Idle Mode
No heating or cooling function.
The fan is operating
Toggling to Manual Mode
Change of page
08:43:55 15.03.07
HAND
HAND
Hand-Mode
TEMP
SPEED
Steuerkontakte
+29.3 °C
+80.0 %
Hand-Mode
TEMP
Operating contacts
+40.0 °C
PGM CONFIG
W
VIEW->
EXIT
Toggling between temperature set-point, and operation lines.
08:43:55 15.12.07
HAND
08:43:55 15.12.07
Operating contacts
Contact 1
Contact 2
Contact 3
Contact 4
Contact 5
Contact 6
Contact 7
Contact 8
On
Off
Aus
Aus
Aus
Aus
Aus
Off
HAND
Contact 1
Off
On
Hand-Mode
TEMP
Oper
+40.0 °C
+80.0 %
TEMP
+0060.0 °C
EXIT
Arrow buttons to select the operation
lines
(Operation line 1 = Bedew protection) Arrow buttons
to enter the
value Button to move the decimal point