Binder 9020-0146, Руководство по эксплуатации

Страница: 47 / 71

MK (E3) 07/2009 page 47/70
14.2 Interface RS 422 (option)
With this option, the chamber is equipped with a serial interface RS 422 instead of the Ethernet Interface,
to which the BINDER communication software APT-COM™ 3 DataControlSystem can be connected. In
adjustable intervals, the actual temperature and humidity values are put out.
Pin allocation of the RS 422 interface: Pin 2: RxD (+)
Pin 3: TxD (+)
Pin 4: RxD (-)
Pin 5: TxD (-)
Pin 7: Ground
14.3 Analog outputs for temperature (option)
With this option, the chamber is equipped with analogue outputs 4-20 mA for actual value and set-point
value of temperature. These outputs permit transmitting data to external data registration systems or de-
vices.
The connection is carried out as a DIN socket (10) in the lateral control panel as following:
ANALOG OUTPUTS TEMPERATURE 4-20 mA DC
PIN 1: Temperature actual value –
PIN 2: Temperature actual value +
PIN 4: Temperature set-point value –
PIN 5: Temperature set-point value +
Temperature range: -40°C / -40°F up to +180°C / -356°F
A suitable DIN plug is enclosed.
Figure 9: DIN socket for option analog outputs for temperature
14.4 Keyboard locking (available via BINDER Individual)
The keyboard of the MB1 controller can be locked and unlocked via the key switch (option). In locked
state, no entries to the controller are possible.
•
Locked keyboard: Switch position vertical
•
Unlocked keyboard: Switch position to the right
You can remove the key only when the keyboard is locked.
W X
CONFIG HAND VIEW ->
EXIT
W
08:43:55 20.12.05
TEMP
°C
25.0
36.8
Key switch
Figure 10: Keyboard locking
If the keyboard is locked, the notification “KEY LOCK” is dis-
played on the controller MB1 display next to a flashing blue
information symbol.
HAND
W
VIEW->
KEY LOCK