Bilanciai FLYNET 100, Инструкция по использованию, обслуживанию и монтажу

Страница: 84 / 125

82
FLYNET 100
Separator Point
Checksu
m Enabled/disabled
Enabled Enabled/disabled
5.5.6.3 General
From this page it is possible to choose whether or not to transmit the first weighing, this parameter is
enabled for example in double weighing operation.
Transmit first
weighing operation Yes/No
5.5.6.4 Delete data
This function allows deleting the data contained in the TxWeighing archive, stored using the Archive
or spool protocols, in case they are no longer needed.
To delete them, simply click on the relevant icon, press yes to confirm and delete or press no to go
back.
5.5.7 Analogue output
Up to 2 optional analogue boards can be fitted on the indicator. Depending on the hardware
configuration of the board it is possible to use it to manage the voltage output from 0V to 10V or the
current output from 4mA to 20mA.
To enable the analogue output go to the configuration section and select
‘Analogue Output’.
Once inside the page, if the board is installed correctly, it is possible to see the instance named with
a number corresponding to the expansion slot on which it is installed.
To configure it, double-click on the small arrow on the right side.
Enable Enable or disable the operation of the optional board
Scale Select the scale on which you want to use the optional board: Selected, A, B, C,
D, S
Weight Indicate with which type of weight the analogue output must vary: Net weight,
Gross weight
Type of output Depending on the position of the jumper, select the correct output. Available:
Voltage, Current
Save to confirm the configuration and proceed to use.
5.6 Activating the optional services
The Flynet indicator contains optional services that can be activated through an activation code.