Bilanciai FLYNET 100, Инструкция по использованию, обслуживанию и монтажу

Страница: 15 / 125

13
FLYNET 100
•
exact address of the site/factory where the equipment is installed
•
contact person.
1.12 Warranty
In the construction of the equipment/indicator, the manufacturer has used materials whose type and
quality are considered to be suitable in its unquestionable judgement.
Even after commissioning, the manufacturer may make modifications considered to be an
improvement in its unquestionable judgement.
The manufacturer guarantees the equipment as free from defects in material or workmanship for the
period specified in the contract with the purchaser/customer.
During this period, the manufacturer undertakes to eliminate the evident defects and/or shortcomings
detected by the buyer/customer within the necessary time. Defective components, excluding parts
subject to wear, will be replaced free of charge during the warranty period, without prejudice to travel
and shipping expenses.
Finally, transport, inspection, disassembly and reassembly costs due to the intervention of a
manufacturer technician or its delegate are excluded from the warranty if the defects and/or
shortcomings detected are not covered by this warranty.
This warranty is only applied to the purchaser in compliance with the contractual rules, and if the
installation and use of the equipment is carried out by the purchaser in accordance with the
instructions contained in this manual.
The manufacturer will not be liable for faults or malfunctions if maintenance deficiencies, lack of
cleaning, replacement with non-original or unauthorised parts and use of the equipment in a manner
different from that indicated in this instruction manual are found. Furthermore, this warranty does not
cover any parts replaced or repaired and all parts that are subject to wear due to their specific use.
Any further obligation and/or compensation and/or indemnity by the manufacturer is expressly
excluded.
The warranty excludes any and all liability for direct or indirect damage to persons and property
resulting from incorrect or incomplete installation, incorrect use and inadequate maintenance of the
equipment. Partial or total non-compliance with the legal requirements in force in the country of use.
The warranty excludes any and all liability for damage due to lack of production or incorrect
metrological evaluation.
Returns of goods will not be accepted unless authorised by the manufacturer and carriage paid.
The full terms of the warranty are set out in the sales contract to which reference is made for full
details.
The warranty is subject to the following conditions:
•
th
e equipment must be used according to the limits stated in the “Technical Data” section of this
manual;
•
the equipment must be used according to the instructions contained in this manual;
•
maintenance must be carried out according to the times and methods provided for in the
manual, using original spare parts and entrusting the work to qualified personnel.