72
DD1010 FLYNET
5.5.2
Network
This function allows creating an external transmission using the network card on the Flynet indicator.
The indicator IP address, subnet mask, default gateway and DNS settings can be found in the Start
menu, refer to the relevant manual to configure them.
To create a network transmission, proceed as follows:
Follow the path Menu/Tools/Configuration/transmission/network to enter the creation page
Click on
'Add' to create a new transmission instance
Enter the name for the following instance and confirm
To configure the transmission correctly, check the following data:
Scale
Select one of the existing scales: A, B, C, D, S, Selected
Port
6001 is the standard port used to transmit the data string externally, it is
possible to open another port if necessary
Transmission
range (ms)
250 default, indicates the pause between the transmission of one data and the
next in cyclic mode; in this way the string is transmitted 4 times per second. It
is possible to reduce the interval up to 100 ms and then transmit data up to 10
times per second (10Hz)
Type of string
The strings present in the Flynet indicator are as follows, to check their
structure refer to the transmission manual
Extended
The following protocols are available: Cyclic, On Demand,
ACK NAK, Remote Commands
CB
The following protocols are available: Cyclic, On demand,
ACK NAK
Btek
The following protocols are available: Cyclic, On request
Cardinal
The following protocols are available: Cyclic, On request
Cardinal 748P
The following protocols are available: Cyclic, On demand,
ACK NAK
SASCO1
The following protocols are available: On request, Remote
commands
telecontr-
extended
The following protocols are available: Cyclic, On Demand,
ACK NAK, Remote Commands
Protocol
Cyclic, i.e. the string is transmitted continuously immediately after the indicator
is correctly switched on, the cyclic string uses the transmission interval to time
the data output
On request, i.e. the selected string format is transmitted:
either when the weighing key is pressed;
or upon activation of an input related to weighing (check the list of available
inputs)
On request with ACK NAK, i.e. the string is sent in the chosen format only
upon the user request. The request can be made:
either by pressing the weighing key;
or by activating a weighing input;
the indicator then behaves as follows:
Содержание DD1010
Страница 2: ......