Bilanciai DD1010, Инструкция по использованию, обслуживанию и монтажу

Страница: 69 / 132

67
DD1010 FLYNET
The parameters to be set are:
IP address Set the IP address of the printer you want to use
Port Enter the printer communication port address (9100 standard)
Type of printer Select a driver from the list according to the printer used:

Canon BJ 300 dpi

Canon BJ 360 dpi

Canon iP90

HP PCL 5e

HP PCL 3

Amtech

Epson ESC/P 2

Epson LX (9-pin)

Epson Stylus Color

M1POS

MP-300

MTE W40

O'Neil 3 inch

O'Neil 4 inch

PocketJet 200

PocketJet II

SP-T8

Zebra
Colours Monochrome Black and white printing
3 colours Print using the following colours: blue, magenta, yellow
4 colours Print using the following colours: black, blue, magenta, yellow
Printer drivers Default, non-replaceable parameter.
When the configuration is finished, save the settings and go to the APPLICATION >> OTHER>>
PARAMETER CONFIGURATION>> MAIN PRINTER section to set the network printer as main or
secondary printer.
Check the operation by printing a weight from the main page. If printing is not performed, check the
following parameters:

Network printer IP address

Check the Flynet indicator network settings (to access another company sub-network it is
necessary to specify the default gateway)

Check the drivers used by the printer, if it is not present in the list of the indicator, contact the
service department

Make sure you have selected the network printer as main or secondary printer and enabled its
use