Bilanciai DD1010, Инструкция по использованию, обслуживанию и монтажу, Страница: 18 / 132

16
DD1010 FLYNET
2 SAFETY REQUIREMENTS
2.1 Not allowed uses
The equipment purchased is a metrological instrument intended for non-automatic weighing and as
such has been designed and manufactured. The primary use for which it is intended is the weighing
of goods.

It is forbidden to use the indicator without the necessary precautions for safe use.

It is forbidden to use the indicator in places with a potentially explosive atmosphere or in places
where fire hazard exists.

It is forbidden to use the indicator outside the environmental, electrical and metrological
conditions prescribed and indicated in this manual.

Misuse of the indicator or use with functions other than those for which it was manufactured is
prohibited.

Use is forbidden if it has not been correctly and completely installed in the site or place for which
it is intended.

Use is forbidden in case of non-compliance with power supply technical specifications.
Uses other than the one for which it has been designed and manufactured relating to non-automatic
weighing within the limits set by the manufacturer represent a misuse and are prohibited, unless
formally authorised by the Manufacturer.
2.2 Regulations
The conditions of use of the electronic indicator for weighing instruments are governed by the
regulations in force in the country of use.
Use under conditions that do not comply with these regulations is prohibited.
2.3 Conditions of use

Carefully follow this manual during use.

If you find any discrepancies between the contents of this manual and the equipment in your
possession, contact your Retailer or the After-Sales Service of the Manufacturer for clarification.

Strictly respect the indications on the warning and danger plates on the indicator.

Make sure that the indicator is complete with all the protections it has been provided for (cover
and protection devices) as shown in the technical drawings in the manual; before use and on a
regular basis, check also the integrity of the cables and their proper connection.

Make sure that the indicator is always connected to a power socket equipped with an effective
ground pin, checking that this line complies with the regulations in force in the country of use.
Make sure there is no difference in potential between ground and neutral.

If the indicator must be connected to other devices such as computers or other equipment,
disconnect them from the power supply before making the connections.

Any maintenance and/or repair work must only be carried out by authorised personnel.

Before carrying out any maintenance work, always disconnect the indicator from the power
supply and wait a few minutes before accessing its internal components.