BEST ACCESS SYSTEMS 34HW, Руководство по обслуживанию, Страница: 113 / 228

Service and Maintenance for Cylindrical Locks
W Series Service Manual 5–3
Removing
components for
IDH Max cylindrical
locks
Task A. To remove the core and throw member:
1. Insert the control key into the core and rotate the key 15 degrees to
the right.
2. Remove the core and throw member from the lever/knob.
Task B1. To remove the keyed lever/knob:
1. Insert a flat blade screwdriver into the figure-8 core hole and into
the lever/knob keeper.
2. Press the screwdriver blade in the direction of the arrow shown in
Figure 5.2 .
Note: You will not be able to remove the lever if the screwdriver
blade is inserted too far past the keeper.
3. Slide the lever off the sleeve.
Figure 5.1 Removing the core and throw member (lever shown)
Core
Control key
Throw member
Figure 5.2 Removing the keyed lever/knob (lever shown)
Insert the screwdriver here.
Figure-8 core hole
Lever keeper