Berthold Duo Xpert, Руководство по эксплуатации

Страница: 77 / 233

LB 470 Level
7 Main Menu Device Setup
56925BA2 Rev. 03, 11/2017
77
Network
Device Setup | Setup | System | Network
In the Network settings submenu, you can make changes to the network settings.
The information can only be edited in the access level "Standard" (see chap. 7.2
Menu Access).
1
2
3
4
5
6
7 Check box "DHCP active"
IP address
Subnet mask
Standard gateway
DNS server
MAC address
Button
<Apply>
Fig. 55 Network Settings
You can set the network address either manually or using DHCP (automatic assign-
ment). To do this, check the "DHCP active" in the selection field (Fig. 55, item 1).
IMPORTANT
In the event of an automatic assignment of the IP address by a DHCP server,
you can only look at the given IP address. A modification of the IP address is
not possible. On this side, you can also read the MAC address of the device
(Fig. 55, item 6).
Manual settings:
1. Click on the text field (Fig. 55, item 2 - 5) to open the input field.
2. Enter the appropriate network addresses.
3. Confirm with the Enter key.
4. Click on <Apply> (Fig. 55, item 7) to adopt the network settings.
IMPORTANT
All settings performed must be confirmed by clicking on <Apply> so that the
settings become real.