Berthold DUO XPERT LB 470RID, Руководство по эксплуатации

Страница: 92 / 240

7 Main Menu Device Setup LB 470RID Level
92
56925-1BA2 Rev.02, 05/2021
Perform Plateau Measurement
Device Setup | Setup | Sensors | [NAME DETECTOR] | Plateau | Plateau Measurement
IMPORTANT
The environmental conditions and the dose rate must be constant during the
plateau recording.

Observe the operating manual of the detector.
1
2
3
4
5
6 Plateau curve
Button
<Start>
Window “Record plateau”
Button
<Yes>
Button <No>
Event message code
7
8
9
10
11
12
Notice Maintenance
Notice “DET”
Progress bar measuring process
Progress bar measuring step
Button
<Stop>
New plateau curve
Fig. 61 Recording a plateau curve
1. Click on <Start> (Fig. 61, item 2) to perform a plateau measurement.

The confirmation message "Record plateau" (Fig. 61, item 3) opens.
2. Confirm with <Yes> (Fig. 61, item 4).

The EVU switches to mode "DET" (Fig. 61, item 8) and the current measure-
ment is stopped.

The information (Fig. 61, item 6 - 8) from the plateau measurement are dis-
played in the status information. The LED Run flashes on the EVU during the
plateau measurement. The LED “Warning” LED lights up at the same time.

If you click on the < Stop > button during the measurement, the measuring
process is interrupted. The measurement data are invalid and will be deleted.