bergmann ALPHA-PACK-BIN, Руководство по эксплуатации

Страница: 24 / 98

5. Operation
5.
04
5.3 Emptying the machine
1) When the PACK-BIN is full, it can be trans-
ported by means of a roller tipper and then be
emptied.
To pick up the BOX, a suspension hook is
attached to the front side of the machine.
The suspension hook on the
unloading door is only used for
manoeuvring.
The projecting end of the PACK-
BIN on the collection vehicle
must not exceed half of the
machine length.
The locking on the transport vehicle must be
carried out according to the instructions of the
vehicle manufacturer.
The driver is to ensure that the
machine was correctly locked.
The driver must ensure that no
persons are located behind the
vehicle as well as in the swing
range of the door.
2) For safety reasons the discharge
opening may only be opened if
the machine stands on the trans-
port vehicle.
A ratchet crank (1) serves as a door lock.
The door can be opened and closed through the
back and forth swing movement of the crank
arm (2).
The crank is switched over by throwing the bolt
(3).
When releasing the lock, the
arresting cable (4) must be
hooked in and released from the
chain (5).
It is prohibited to stay behind the
discharge opening.
4 1 3 2 5