bergmann ALPHA-PACK-BIN, Руководство по эксплуатации, Страница: 37 / 98

7. The additional equipment
7.5 The HUB-TILTING DEVICE
1) Push the garbage container into the
machine up to the stop.
Due to different heights of the containers,
the HUP-TILTING-DEVICE must be
lifted up to the height of the cone and/or
comb inlet.
Depending on the container type, there
are different reception systems:
The so-called comb pouring (1) and the
reception by means of special lever arms
(2) which can be adjusted to the container
depending on customer's requirements.
A safety pendulum at both retainer hooks
assures that the garbage container while
swiveling in the compaction chamber of the
machine not falls out of the reception.
Please check prior to any use whether they
are intact.
The max. load bearing
capacity of the chain case
lift-tilt device is 300 kg.
The max. load bearing
capacity of the lift-tilt
device is 600 kg.
2) Start the compaction process by
activating the push-button ON .
1
Retainer hooks (4 pcs)
for comb pouring
2
Detector arms ccording
to customer's
requirements
Safety
pendulum
Garbage
container
7.5.1 The operation of the HUB-TILTING DEVICE
7.
03
Container types according to DIN EN 840, with a width of 1,260 mm, a cone height of 980 to
1,280 mm or a neck height of 820 to 1,120 mm, may be tipped.
This is to be inspected prior to use.
As a rule, the standard is stamped into the container.
The factory must be asked for special container sizes and special containers (e.g. crates, etc.).
The automatic cover openers and oscillating cover openers are available as accessories.