bergmann ALPHA-PACK-BIN, Руководство по эксплуатации

Страница: 40 / 98

7. The additional equipment
During transport of the PRESS-BOX, principally dismount the push rod and fix
it again at an lateral part of the machine.
During the dismounting the HUP-TILTING-DEVICE must be moved into its
lowest position.
For safety reasons no the push rod can be extended.
For the transport, the HUP-TILTING-DEVICE must be moved into its highest
position.
7.5.1.2 The automatic swinging lid opener (optional)
Optionally, your PRESS-BOX with integrated HUP-TILTING-DEVICE can be equipped with an automatic
swinging lid opener.
That lid opener is suited for 1.1m³ roll container with swinging lid according to DIN 30700.
That device enables an automatic opening and closing of the container lid during the tilting process.
1) If the voltages are compatible, you can connect the PRESS-BOX to the power supply.
2) Turn the main power switch in the ON position.
3) Unlock both EMERGENCY STOP buttons by turning them to the right and start the machine.
4) Activate both push-buttons LOWER at the same time until the HUP-TILTING-DEVICE is moved
downwards.
5) Push the garbage container into the machine up to the stop (see point 5.4).
6) Activate then both push-buttons LIFT at the same time.
The operator of the HUP-TILTING-DEVICE must
assure that there is no person within the danger zone.
Residing on or below the lifted
HUP-TILTING-DEVICE is prohibited.
Take care that the cone of the swinging lid reaches
exactly into the swinging lid opener; otherwise the
swinging lid will not be opened.
7.
06