bergmann ALPHA-PACK-BIN, Руководство по эксплуатации

Страница: 56 / 98

11. Maintenance and Care
11.
02
11.2 Maintenance and inspection list
Interval Description of work Procedure see chapter /
note
prior to every check main switch and function check see ch. 3.2.3
switching on both EMERGENCY SHUTOFF buttons
after the check all hydraulic connections visual check, retighten screwed
first 20 - 50 for leakages connections and/or replace
operating
hours
retighten all screwed connections
after the first check oil filter for pollution open the tank room doors,
100 to 200 unscrew filter tap, remove filter
operating hours element, clean if required
weekly check service shaft visual check, if necessary waste
deposits can be removed
every 2 weeks lubrication of bearing points with 1-2 portions of grease see ch. 10.3
check slide faces of the piston Remove smaller hard material if
existing, grease slide faces if required
monthly check electrical lines for chafe marks visual check,
replace lines as required
check hydraulic hoses for chafe marks visual check,
replace hoses as required
check hydraulic screwed connections visual check, retighten screwed
for leakages connections and/or replace
check oil level the oil in the transparent hose (to the compacting piston
right of the tank room) has to be must stand at top
slightly lower than the MAXIMUM mark in charging room,
on the adhesive oil level label see ch. 7
check screwed connections retighten connections as required
quarterly clean electric motor remove motor protection, clean fan see ch. 10.4
blades, cooling vanes, motor protection
check electrical components for dust visual check, remove dust with soft
deposits brush
check rubber lip visual check, replace as required
half-yearly check the hydraulic cylinders and visual check, clean if required
cylinder shafts
yearly
*)
oil change in hydraulic unit see ch. 7
replace the rubber lip