bergmann ALPHA-PACK-BIN Скачать руководство пользователя страница 5 | Manualshive

Страница: 5 / 98

bergmann ALPHA-PACK-BIN Скачать руководство пользователя страница 5

1. Use for intended purpose

1.

01

The present unit is a stationary operated compaction container which can be taken up by a roller
tipper for transport and emptying purposes. The machine was only manufactured for a specific pick-
up system according to customer requirements and is therefore only suitable for use with this system.
The ALPHA-PACK-BIN has been designed only for the compaction of valuable substances and wastes
and may be used for this purpose only. Any other use or application beyond this must be considered
as improper use. BERGMANN will not accept any responsibility for any damages resulting from this.

Proper use also includes

•

observing all operating instructions as set out in the Operating and Maintenance Manual,

•

observing the service and maintenance instructions

•

the prohibition of any extensions or reconstructions of the machine.

Awareness of the basic safety instructions and regulations is of utmost importance in order to handle
the machine safely and to guarantee trouble-free operation. These operating instructions contain the
most important information needed to operate the machine in compliance with the safety instructions.

Ensure that the operating manual is given

to the operator and kept in a safe location.

Read and observe the entire

operating manual, including all details.

There may be deviations in technical data, illustrations and dimensions due to continual further
development.

When ordering spare parts please quote the machine serial number, the spare parts list page and the
name of each item with its part number.

Label :

«
...
3
4
5
6
7
...
»

Содержание ALPHA-PACK-BIN



































































































Отзывы:

Нет отзывов