manualshive.com logo in svg

Bentel KYO 32 M, Руководство по установке

Поделиться
Скачать
Bentel KYO 32 M Скачать руководство пользователя страница 64

64

Multifunction Control Panel

Teleservice Page

The parameters in this page (see Figure 3.11) determine the way the Control
panel will respond to incoming Calls from the Central Station.

The Control panel will answer incoming Teleservice calls only when the User
has enabled the Teleservice option or Answering device option (refer to ‘En-
able/Disable  Teleservice’ in the User Manual).

z

z

z

z

z

Double Call

  - This option allows the Control panel to share the Telephone

line with another answering device (Answerphone, Fax, etc.). If this option
is enabled, the Control panel will override other telephone devices when it
recognizes the Double call sequence.

z

z

z

z

z

Number of Rings

 - The value entered in this field determines the number

of rings the Control panel will allow before answering an incoming call. If
the ‘Double Call’ option is enabled this parameter will be ignored.

z

z

z

z

z

Callback 

 - If this option is enabled the Control panel will call the ‘Installer

Telephone Number’ when it receives the Teleservice call. In this way, au-
thorized persons 

only 

can access the system.

z

z

z

z

z

Customer Code

 - This field shows the Customer code.

z

z

z

z

z

Installer Telephone Number

 - This field holds the ‘Teleservice’ number. The

Control panel will call this number when it receives an incoming Teleservice call

z

z

z

z

z

Listen-in

 - If this option is enabled, the Central Station operator (after

receiving an Alarm call from the system) will be able  to open a Listen-in
session on the monitored premises.
If the 

‘2-wayAudio alert’ 

is enabled (refer to the ‘Options’ Page), the Control

panel will open the Audio channel for 15 seconds before starting the Listen-
in session.  

The ‘2-wayAudio alert’ is valid for all protocols.

z

z

z

z

z

2-Way Audio

 - This option will allow the operator to open a 2

-

Way Audio

session and talk to persons on the monitored premises.

z

z

z

z

z

2-Way Audio Timeout

 - This parameter determines the duration of the

Listen-in or 2-Way Audio session. The session will close automatically when
the programmed Timeout ends, or when the operator ends the session.
The programmed Timeout is valid for all 8 Telephone Numbers.

Call Attempts

The value entered in this field determines the number of times the Control panel
will dial a telephone number before quitting the unaswered call (8 at default).

Accessing the DTMF Menu

If you enable 

Listen-in

 with 

2-Way Audio Timeout

,

 

the operator will be

able to 

access the

 

DTMF  menu over the phone

. To do so, the operator

must press any number on the telephone keypad and wait for the audible
feedback signal (5 beeps), then enter a Valid DTMF Code (for further details
refer to “Operating the System from a Telephone” in the USER MANUAL).

Export to WinBcs

Use this button to export data to the “Bentel Central Station” application.

Содержание KYO 32 M

























































































Отзывы:

Нет отзывов

Бренды по названию

Популярные бренды

Загрузить еще бренды