Bennett SITE MASTER EMV, Сборка

Страница: 16 / 28

Bennett Site Master Instruction Manual Installation
12
RS-485 COMMUNICATION PROTOCOL FOR SITE MASTER SP
Read all safety instructions and notes shown in Figure 1.6 and on wiring diagram 126000-P4229 before applying power to the Site
Master.
NOTES FOR COMMUNICATION WIRING DIAGRAM
1. All wiring must be installed and used in accordance with the national electrical code (NFPA #70, Automotive and marine service
code NFPA #30A), state, and local electrical codes.
2. All wiring gauge is minimum required, stranded wire with THHN insulation must be used. Do not reuse old wire from an existing
installation.
3. Do not use PVC conduit. Use only rigid metal conduit.
4. Field connection =
Figure 0.6 – RS-485 Communication
P4229
Sheet 2
Rev B