Bennett SITE MASTER EMV, Сборка

Страница: 18 / 28

Bennett Site Master Instruction Manual Operation
14
SSP PAYMENT MODULE
CAUTION: DO NOT REMOVE encrypted PIN Pad or secure card reader from the payment panel. If either
component is removed, activation will be lost and it will become inoperable. It cannot be re-
activated at the site; it must be returned to Bennett Pump for replacement.
The SSP option allows the customer to pay for fuel with a credit card or debit card and receive a receipt. The dispenser is connected to a
financial network through a POS system to allow approval of the cards at the time they are inserted into the dispenser.
Refer to the
Simply Secure Payment PCI 3.1 (Large Display w/ SBC2) Programming, Service, and Parts Manual for more information
POWERING UP THE MODULE
The display module receives its power from the power board within the Site Master. There are no power switches on the payment
module. The only way to power the module on or off is by turning the power to the Site Master on or off.
When power is applied to the Site Master, the Bennett Logo will appear for approximately 3 seconds as shown in Figure 2.3 .
Note :
PLEASE PAY INSIDE
will be displayed as shown in Figure 2.4 only if the module and/or POS (Point of Sale) has not been
configured, installed at this time, or communication has been lost.
Refer to 132544 Simply Secure Payment (SSP Large Display w/ SBC2) Programming, Service, and Parts Manual for
Installation, Operation, Programming, and Service information
GAINING ACCESS TO MA NAGERS MODE
The Soft Keys on the right hand side of the display are the only keys used to enter into Managers Mode. The
top Soft Key on the right is 1 and the bottom Soft Key on the right is 4. The code for entering into Managers
Mode is
122114 . Refer to Figure 2.5 for soft key number locations.
Once the correct access code is entered,
MANAGER MODE
:
00 will be displayed at the top of the display. Refer
to the Simply Secure Payment PCI 3.1 (Large Display w/ SBC2) Programming, Service, and Parts Manual for
programming and more information.
PLEASE PAY INSIDE
Figure 2.4 - Non-Configured Module Figure 2.3- Bennett Logo (Power Up)
Figure 2.5 – Right Hand Side Soft Keys