Bennett SITE MASTER EMV, Сборка

Страница: 21 / 28

Bennett Site Master Instruction Manual Maintenance
17
CLEANING
WARNING: DO NOT USE A HIGH-PRESSURE WASHER TO CLEAN THE DISPENSER. LIQUID UNDER PRESSURE CAN ENTER
THE DISPENSER CABINET AND DAMAGE ELECTRONIC COMPONENTS.
WARNING: DO NOT USE STRONG DETERGENTS, PETROLEUM SOLVENTS, ABRASIVE CLEANERS, OR STEEL WOOL TO CLEAN
THE DISPENSER.
IMPORTANT: TO REMOVE TREE RESIN OR SAP FROM DISPENSERS, USE TURPENTINE.
IMPORTANT: DISPENSING EQUIPMENT SHOULD BE CHECKED AS RECOMMENDED BY TRAINED PERSONNEL TO VERIFY
PROPER WORKING CONDITION.
Keep the dispenser clean and protected. It will keep a “new” pump appearance longer. Note: Follow the suggested maintenance
frequency and record results in the maintenance log. Keep in a readily accessible location .
CLEANING PAINTED SUR FACES
1. Wash the dispenser in a solution of warm water and a mild detergent that removes grease and oil.
2. Rinse thoroughly with clean water.
3. Dry all surfaces with a clean cloth.
4. If the surface is dull due to oxidation, apply a cleaner specially formulated to remove oxidation to the clean surface. This will restore
luster to the painted surface.
CLEANING STAINLESS STEEL, ANODIZED ALUMI NUM OR CHROME-PLATED PANELS
1. Wash the dispenser in a solution of warm water and a mild detergent that removes grease and oil.
2. Rinse thoroughly with clean water.
3. Dry all surfaces with a clean cloth.
4. Apply a coat of non-abrasive paste wax to protect the panels from corrosion