Bender UNIMET 1000ST, Руководство по эксплуатации

Страница: 60 / 100

Testing and measuring
60 TGH1256en/10.2005
5.2.8 Exit classification
Once all settings have been made, exit the master data screen by pressing .
For our example, we are selecting “F1: …create in type catalogue” in the “Save classification”
menu.
This completes the classification of this device type. UNIMET® 1100ST now returns to the
classification screen in order to classify another device.
F1 The classification is saved in the type catalogue under the type name.
F2 If an ID number has been assigned with “F4”, you can use this key to
subsequently save the test under this ID number in the device catalogue. The
ID number will then appear instead of “-”.
F3 Do not save changes. The entries and changes are rejected following the
appearance of a safety prompt.
F4 Back to master data screen. The master data can be edited and the test can be
started.
F5 The test result and ID number (if available) are displayed, along with the
sequence of test steps.
Exit menu. The entries and changes are rejected following the appearance of
a safety prompt.
<<
<<