Bender UNIMET 1000ST, Руководство по эксплуатации, Страница: 33 / 100

Operation and setting
33 TGH1256en/10.2005
How to modify the limiting value for test steps
This warning will appear on the UNIMET® 1100ST screen.
1. Edit the limiting value:
2. Press Enter to confirm the changes.
3. Press Enter again to apply the limiting value.
4. Press “F1” to add the test step to the test sequence.
If you change a limiting value, it will be changed for all test steps of the same
name in this test sequence. Check if any other test steps have the same name and
whether they are compatible with the change in limiting value for these test steps.
Go back to the previous step in the operation without making changes.
Move the change marker to the limiting value digit to be changed.
,
Select the numerical value for the current limiting value digit.
Reset the limiting value to the default setting.
<<