Bender UNIMET 1000ST, Руководство по эксплуатации

Страница: 32 / 100

Operation and setting
32 TGH1256en/10.2005
3. Select the group of messages to which the required test step belongs (e.g. touch current direct
test).
Press Enter to select the group.
4. Select the test step to be added.
Press Enter to select the test step.
5. Unimet will suggest a limiting value. You may change this value if you wish. If you change the
limiting value, you must ensure observance of applicable standards.
Press Enter to apply the suggested test value.
6. Press “F1” to modify the limiting value and confirm the change by pressing Enter (see also “How
to modify the limiting value for test steps” on page 33).
7. Press to go back to the previous step in the operation.
<<