Bender UNIMET 1000ST, Руководство по эксплуатации

Страница: 49 / 100

Operation and setting
49 TGH1256en/10.2005
Test result
[-> Main menu -> F5: System administration -> F5: Setup -> F5: More -> F3: System time, Start menu, Test
result -> F3: Test result]
Specify how UNIMET® 1100ST should respond following an automatic test:
Program update
[-> Main menu -> F5: System administration -> F5: Setup -> F5: More -> F4: Program update]
Starting an update of the operating software. A detailed description of the updated procedure appears in
“Updating the Unimet operating software (firmware update)” on page 77.
F1 Only if the test is failed will the test result appear immediately. For tests which
have been passed, a menu will appear in which you must select how to
proceed with the test result. This can be useful if the test results simply need
to be saved and not processed further until a later date.
F2 Always show test result after test.
Exit function without making changes.
F1 Exit function without making changes.
F2 Start update.
<<