Belden Miranda DENSITE 3+ FR1, Руководство пользователя

Страница: 33 / 65

19
Densité 3+ FR1
User Manual
Changes to these parameters require a controller reboot. Click Reboot... to accept the
changes and restart the controller. Click Cancel... to reject the changes and leave the
settings unchanged.
Using the Menu:
To change the IP address::
To enable/disable the Redundancy option, and select the bonding mode:
Note that the Host Name and the MAC address are reported in the menu but cannot be
changed from there.
Identification
iControl - click the Info button
The CPU-ETH2 controller is accessible on a
network, and must be identifiable in order to
function in the iControl environment. The
identification data is entered in the iControl
INFO control panel. This panel also shows
other data that is not user-adjustable.
You can enter the following information by
clicking and typing in the data box:
Label : allows the user to define the label that
identifies this device when it appears in
iControl applications
Short Label: allows the user to define the
short-form label for iControl (8 characters)
Source ID: type a descriptive name for this
CPU-ETH2 controller
Comments: type any desired text
The remaining data boxes show manufacturing information about this card.