Belden Miranda DENSITE 3+ FR1, Руководство пользователя

Страница: 53 / 65

39
Densité 3+ FR1
User Manual
Menu for local control
The REF-1801-FR1 has operating parameters which may be adjusted locally at the
controller card interface. After pressing the
Select button on the REF-1801-FR1 module, use
the keys on the local control panel to step through the displayed menu and adjust the
parameters. The menu is shown below.
STATUS
REFERENCE SOURCE [ AUTO, EXTERNAL, INTERNAL ]
URS GEN MODE [ NORMAL, FREERUN ]
TIME CODE SOURCE [ AUTO, LTC, VITC, OFF ]
PROCESSING MODE [ NORMAL, PASS THROUGH ]
USER BITS [ OFF, ON ]
CONFIG ALARMS NO INPUT SIGNAL ALARM LEVEL [ GREEN, YELLOW, RED, FLASH RED ]
ALARM REPORT [ NONE, GPI ]
NO TIME CODE ALARM LEVEL [ GREEN, YELLOW, RED, FLASH RED ]
ALARM REPORT [ NONE, GPI ]
VERSION MAJ.MIN.Number.Build
FACTORY DEFAULT RESTORE
Status LED
The status monitor LED is located on the front card-edge of the REF-1801, and is visible
through the front access door of the Densité frame. This multi-color LED indicates module
status by color, and by flashing/steady illumination, according to the chart below. The chart
also indicates fault reporting for this card on the Densité frame’s serial and GPI interfaces.
Fault
Serial
Report
GPI
Report
Green Yellow Red
Flashing
Red
Mode Freerun

No Signal

I/O Mismatch

No Time Code

Hardware failure


: Factory default.
A Flashing Yellow Status LED indicates that the SELECT button on the front panel has been
pushed.
Remote control using iControl
The operation of the REF-1801-FR1 may be controlled using Grass Valley’s iControl system.
• This manual describes the control panels associated with the REF-1801-FR1 and their
use.