Belden Miranda DENSITE 3+ FR1, Руководство пользователя

Страница: 26 / 65

12
Densité 3+ FR1 Housing Frame
Installing and Replacing the System Card
Installing and Replacing the System Card
The system card is located in the upper right-hand-side of the Densité 3+ FR1 frame, as
seen from the front. The system card is optional, and may be factory-installed when the
system is ordered, or installed by the user later.
At the time of writing, there are two system cards that may be used in the Densité 3+ FR1
frame:
REF-1801-FR1 HD/SD Frame Reference Module
• This version of the REF-1801 card can only be used in the Densité 3+ FR1 frame.
• Its user manual is included as Chapter 4 of this document.
GPI-1501 GPI I/O Module
• The GPI-1501 requires a special rear panel when used with the Densité 3+ FR1 frame.
• See the GPI-1501 User Manual for instructions on installing and using this card and its
associated rear panel.
Note : As with all Densité cards, you must install the rear panel before inserting the card into
the system card slot.
Specifications
MECHANICAL
Dimensions 1RU x 19” W (485 mm) x 11.25” D (286 mm) with connectors
Weight: 7.16 lbs (3,25 kg) with 1 PSU and controller card installed
POWER
Input Range: AC 100-240V, 50-60 Hz
Rating: 150 W max each power supply
Operating Temp. Range: 0-40° C
COOLING
Fans: 2 on frame, serviceable
1 on each installed power supply
COMMUNICATION
Connectors: RJ45 (2)
Compliant to: Ethernet 10/100 Base-T
ALARM
Connectors: GPI