Belden Miranda DENSITE 3+ FR1, Руководство пользователя

Страница: 38 / 65

24
CPU-ETH2 Controller Card
Data Restoration
iControl - click the Restore Point button and view the Cards tab.
The tab show a list of the slots
available in the Densité frame, with a
check box, name, and status box for
each.
• The Densité 3+ FR1 frame uses
only slots 1 to 4.
• A GPI-1501 or a REF-1801-FR1
inserted in the dedicated system
card slot will appear in slot 5.
Click the check box to activate the
Data Restore feature for the card in
that slot,
-or-
Click the Select All box at the top to
activate the feature for all slots in the
frame.
Click Save to controller at the bottom
to copy all restorable data from the
cards in the selected slots into the
memory on board the CPU-ETH2 controller.
Click Load to cards to load the cards in the selected slots with data from the controller’s
memory.
Note that a data restore will only work if the card in the slot is the same type as the card that
was there when the data was saved.
For automatic restore and save:
iControl - click the Restore Point button and view the Config tab.
Restore: The CPU-ETH2 card can be set up to automatically update a card when it is
inserted in a slot previously occupied by a card of the same type whose data was saved.
Thus, a new card can be configured automatically to replace the card that was removed,
saving a lot of time when cards are swapped.
Click the Default Action box to enable the auto restore function for all the cards in the frame.