Belden HIRSCHMANN BRS20 Скачать руководство пользователя страница 9 | Manualshive

Страница: 9 / 88

background image

Installation BRS20/22/30/32/40/42/50/52

Release 06 03/2020

9

Note:

The devices can be supplied either via one voltage input or

redundantly via both voltage inputs.



Supply voltage

The supply voltage is connected to the device casing through protective
elements exclusively.



LED or laser components

LED or LASER components according to IEC 60825-1 (2014):
CLASS 1 LASER PRODUCT
CLASS 1 LED PRODUCT



The supply voltage corresponds to the voltage specified on the type plate of the device.



The power supply complies with the requirements for a safety extra-low voltage (SELV) or
ES1 as per IEC/EN 62368-1.



The power supply has an easily accessible disconnecting device (for example a switch or
a plug). This disconnecting device is clearly identified. So in the case of an emergency, it is
clear which disconnecting device belongs to which power supply cable.



The wire diameter of the power supply cable is at least 0.75 mm² (North America: AWG18)
on the supply voltage input.
The wire diameter of the power supply cable is at least 1 mm² (North America: AWG16) on
the supply voltage input for PoE device variants.



The cross-section of the ground conductor is the same size as or bigger than the cross-
section of the power supply cables.

Depending on the voltage input used (characteristic value F, T, U, P) and the supply voltage
used (DC, AC), the following additional requirements apply:
Device variants
featuring supply
voltage with
characteristic
value F, T, U

All

of the following requirements are complied with:

Supply with DC voltage:



There are fuses suitable for DC voltage in the positive conductors of
the supply lines, or the voltage sources are appropriately current-
limited. Regarding the properties of this fuse:

See “Technical data”



The negative conductors of the voltage inputs are on ground
potential.

Device variants
featuring supply
voltage with
characteristic value F

All

of the following requirements are complied with:

Supply with AC voltage:



There are fuses in the supply lines, or the voltage sources are
appropriately current-limited. Regarding the properties of this fuse:

See “Technical data” on page 54.



The power sources are electrically isolated from the ground
potential.

Device variants
featuring supply
voltage with
characteristic value P

All

of the following requirements are complied with:



There are fuses suitable for DC voltage in the positive conductors of
the supply lines, or the voltage sources are appropriately current-
limited. Regarding the properties of this fuse:

See “Technical data”



The power sources are electrically isolated from the ground
potential. According to specification IEEE 802.3, the insulation
voltage must be 1500 V AC or 2250 V DC.

Prerequisites:

«
...
7
8
9
10
11
...
»

Содержание HIRSCHMANN BRS20

























































































Отзывы:

Нет отзывов

Похожие инструкции для HIRSCHMANN BRS20

Бренд: D-Link Страницы: 14

Бренд: D-Link Страницы: 7

Бренд: D-Link Страницы: 41

Бренд: Ruckus Wireless Страницы: 56

Бренд: Aztech Страницы: 2

Бренд: Supero Страницы: 112

MultiConnect SE MTS2EA

Бренд: Multitech Страницы: 8

RealPort Ethernet 10/100

Бренд: Xircom Страницы: 30

Бренд: Tektronix Страницы: 178

Бренд: H3C Страницы: 3

Бренд: Ubiquiti Страницы: 20

TD-3316B4-16P-A1

Бренд: TVT Digital Страницы: 2

Бренд: Black Box Страницы: 12

Бренд: Nexxt Страницы: 2

Бренд: Supero Страницы: 54

Бренд: Axis Страницы: 64

Бренд: SHOWTEC Страницы: 15

Бренд: CalAmp Страницы: 52

Бренды по названию

0 1 2 3 4 5 6 7 8 9 A B C D E F G H I J K L M N O P Q R S T U V W X Y Z

Популярные бренды

Загрузить еще бренды