Belden grass valley Kaleido-IP X120, Инструкция по установке и обслуживанию

Страница: 29 / 110

29
Kaleido-IP X320/X120
Installation & Service Manual
Changing the Management Network IP Address from the Monitor Wall
The Management Network IP address, system name, and other parameters can be set via a
control panel on the monitor wall, however this will also change the current IP address of
the
Media Network interfaces.
To change the Management Network IP address of the Kaleido-IP from the monitor wall
1 Connect a mouse to one of the USB connectors of the Kaleido-IP. See Troubleshooting
with the Kaleido-IP frame’s USB ports , on page 96 for more information about this.
2 Connect a keyboard to one of the USB connectors of the Kaleido-IP.
3 Right-click anywhere on the monitor wall, point to Monitor Wall (if you clicked a
monitor), and then click System configuration .
The System Configuration window appears.
4 Click the Ethernet tab.
5 Type the required Management Network’s IP address, network mask, and gateway
address in the appropriate boxes.
6 Click OK .
7 When prompted to restart the system to apply your changes, click Yes .
8 Continue with the next procedure to set the IP addresses for the Media Networks .
Once you have configured the Management Network IP address from the monitor wall, use
XAdmin to configure an IP address for the network adapter that is connected to the Media
Network .