Belden grass valley Kaleido-IP X120, Инструкция по установке и обслуживанию

Страница: 62 / 110

62
System Configuration
Changing the XAdmin Password
XAdmin must upload the password to the multiviewer, for password enforcement to
take effect. A progress indicator appears momentarily, followed by a confirmation
message.
7 Click OK .
The Log in to XAdmin page appears. Other XAdmin sessions open against the same
multiviewer are also redirected to the login page.
8 Type the password, and then click Log in .
The XAdmin Status and Options page appears.
9 Click Log out , when you are ready to close your session.
A confirmation message appears.
10 Click OK .
The login page appears. Only authorized users have access to XAdmin.
Changing the XAdmin Password
To change the password used to prevent access to your multiviewer from XAdmin
1 Open XAdmin. See Opening XAdmin , on page 49.
2 Click Access control , in the navigation area on the left side of the page.