Belden grass valley Kaleido-IP X120, Инструкция по установке и обслуживанию

Страница: 82 / 110

82
System Configuration
Adding Fonts to a Kaleido-IP
5 Navigate to the font file you want to upload, select it, and then click Open .
A progress indicator appears momentarily, followed by a confirmation message.
6 Click Restart unit .
The system prompts you to confirm.
7 Click Yes to proceed.
Your multiviewer will shut down, and then start again. This may take a while.
Once the multiviewer has restarted, the system notifies you.
8 Click OK .
The XAdmin Status and Options page appears.
9 Make sure the same font is available on the client PC where you use XEdit. (To install a
font on Windows 7 or later, right-click the TTF file, and then click Install .)
10 Close XEdit and then open it again.
The new fonts are now available, if you:
• Connect XEdit to the multiviewer.
• Download the database from the multiviewer to your local workspace
(see Importing a Database on page 83).
Note:
The Kaleido Software supports true type fonts (TTF) only.
IMPORTANT
Upgrading or reinstalling the Kaleido Software removes all additional fonts
you may have uploaded to the multiviewer. In such case, you will need to
repeat this procedure.