Belden grass valley Kaleido-IP X120, Инструкция по установке и обслуживанию

Страница: 28 / 110

28
IP Network Setup
Networking Essentials
A client PC must have IP connectivity with the Management Network , to communicate with
the multiviewer (see System Requirements for a Client PC , on page 39). You must also
configure any Kaleido-RCP2 units you may have ordered (see Using a Kaleido-RCP2 with
Default Settings , on page 67).
The Kaleido-IP is shipped with the following default settings.
Kaleido-IP default IP settings
Kaleido-IP-6 Kaleido-IP-4
Management Port IP address ( LAN1 ) 10.0.3.70 10.0.3.70
Network mask 255.255.0.0 255.255.0.0
Default gateway 10.0.0.1 10.0.0.1
Link mode Auto-negotiate Auto-negotiate
Media Port 1 IP address ( LAN2 ) 172.30.3.70 172.30.3.70
Network mask 255.255.0.0 255.255.0.0
Gateway None None
Link mode Auto-negotiate Auto-negotiate
Media Port 2 IP address ( LAN3 ) 172.30.3.71 172.30.3.71
Network mask 255.255.0.0 255.255.0.0
Gateway None None
Link mode Auto-negotiate Auto-negotiate
Media Port 3 IP address ( LAN4 ) 172.30.3.72 172.30.3.72
Network mask 255.255.0.0 255.255.0.0
Gateway None None
Link mode Auto-negotiate Auto-negotiate
Media Port 4 IP address ( LAN5 ) 172.30.3.73 —
Network mask 255.255.0.0
Gateway None
Link mode Auto-negotiate
Media Port 5 IP address ( LAN6 ) 172.30.3.74 —
Network mask 255.255.0.0
Gateway None
Link mode Auto-negotiate
Note:
If the Management Port IP address of your Kaleido-IP has been
changed (i.e. it no longer corresponds to the as-shipped configuration), it is
still possible to determine the current
Management Port IP address setting.
See Verifying the Management Port IP Address and Application Version on
page 85.