Belden grass valley Kaleido-IP X120, Инструкция по установке и обслуживанию

Страница: 75 / 110

75
Kaleido-IP X320/X120
Installation & Service Manual
The system prompts you to confirm.
4 Click Yes to proceed.
Restart unit Restart a Kaleido-IP multiviewer
Note:
Clicking the “Reset multiviewer” button on the Status and Options
page for a Kaleido-IP is equivalent to this option except that there is no
feedback from XAdmin.
Shutdown Shut down a Kaleido-IP multiviewer
For Then
Restart software Your multiviewer’s operating system will shut down, and then start again.
This may take a while.
Once the monitor wall software has restarted, the system notifies you.
Click OK .
The XAdmin Status and Options page appears.
Restart unit Your multiviewer will shut down, and then start again, during which time
you can observe messages associated with the Linux shutdown and boot
sequences on the monitor wall display connected to Head 1. This may take a
while.
Once the multiviewer has restarted, the system notifies you.
Click OK .
The XAdmin Status and Options page appears.
Shutdown Your multiviewer will perform a clean shut down, during which time you can
observe messages associated with the Linux shutdown sequence on the
monitor wall display connected to Head 1.
Click OK to continue.
Click To