Belden grass valley Kaleido-IP X120, Инструкция по установке и обслуживанию

Страница: 20 / 110

20
Installation
Frame Physical Interface
• Up to five more dedicated 1000Base-T (or 100Base-T) Ethernet switches for your
Kaleido-IP X320 units equipped with six network adapters to connect to high-
bitrate data streams
• Client PC (see System Requirements for a Client PC , on page 39)
• Cables (to connect your multiviewers to displays, and to the networks):
Frame Physical Interface
When the front cover is removed, the following controls and indicators are available.
For more information about the frame’s controls and indicators, refer to the
Supermicro
SuperServer User’s Manual. See Related Documentation , on page 15 .
Mechanical Installation
Setting up the Kaleido-IP Hardware
To set up the Kaleido-IP hardware
• Refer to the Supermicro SuperServer User’s Manual (see Related Documentation , on
page 15 ) shipped with your Kaleido-IP unit, mount the unit in a standard 19-inch rack.
Make sure that the unit has adequate ventilation.
Cable type Purpose
CAT-5 For Ethernet connectivity ( Management Network , Media Networks )
Display cables Extension modules:
• for example Grass Valley’s DXF-200 (part number DXF-200-C)
• or standard DVI, HDMI, or DisplayPort cables and DisplayPort-to-
DVI adapters, if needed.
Control Panel
2

USB Ports 10

SAS3/SATA/NVMe Hot-Swap Drive Bays