Belden grass valley Kaleido-IP X120, Инструкция по установке и обслуживанию

Страница: 70 / 110

70
System Configuration
Available Hardware and Software Options
The following table lists hardware options that can be installed in the field. Refer to the
Supermicro SuperServer 1028U Series User’s Manual for model 1028U-TR4+ for more
information about how to install an option card. See Related Documentation , on page 15.
Add-on cards must be installed in specific server card-slot locations. See Network Interface Card
Installation Location in the Server , on page 71.
Display 90-Degree
Rotation KIP-OUT-ROTATOR Rotation license.
i. For example, each stream that has 5.1 and 2.0 audio is considered to have two programs and
requires one 5.1 decode license and one 2.0 decode license.
Note:
The Kaleido-IP currently supports the streaming of both heads
through the KIP-OPT-STREAMING-OUT option. It is not possible to enable or
verify this option in XAdmin’s
Status and Options page, for this multiviewer
model. Contact Technical Support for activation and configuration
instructions (
Grass Valley Technical Support , on page 110).
The Kaleido-IP currently supports display rotation. It is not possible to enable
or verify these options in XAdmin’s
Status and Options page, for this
multiviewer model. Contact Technical Support for activation and
configuration instructions (
Grass Valley Technical Support , on page 110).
Kaleido-IP X320/X120 PCI network interface add-on card options (choose one)
Option Part Number
To be Installed in
Server PCI Expansion
Slot Number
Feature
Extra 2 × GigE RJ45
ports KIP-OPT-ETH-2B 4 Dual NIC card (1Gb/s)
i
.
i. Adds LAN5 and LAN6 to the multiviewer (if not already installed). PCI network interface cards
cannot be installed in both slot #2 and slot #4 at the same time; only one network interface card can
be installed. The KIP-OPT-UCIP option is also required for any one of these cards to decode 2022-6
video streams (see the table
Kaleido-IP X320/X120 CODEC options , on page 69).
Extra 2 × 10/25G
SFP28 ports KIP-OPT-ETH-2S 2 Dual NIC card (1/10/25 Gbps)
for SFP cartridges
i
.
Extra 2 × 40/50G
QSFP28 ports KIP-OPT-ETH-2Q 4 Dual NIC card (40/50 Gb/s)
for QSFP cartridges
i
.
Kaleido-IP X320/X120 feature options (continued)
Option Part Number Feature