Belden GRASS VALLEY DENSITE 3+ FR4, Руководство пользователя

Страница: 27 / 59

15
Densité 3+ FR4
User Manual
Using the local control interface
The local control interface is fastened to the front of the CPU-ETH3 controller card, and when
installed is located in the top center of the frame.
The touch screen interface is accessed through an aperture in the frame door.
In its home state, it shows the contents of all 24 slots in the Densité 3+ FR4 frame:
• Card type (text)
• Card status (colored outline)
The status of the controller itsef is shown in the CTRL segment on the top right.
Touching a “slot” displays the local menu and navigation controls for the card occupying that
slot:
• Two lines of text, each 16 characters in length
• Four virtual pushbuttons.
Touching the CTRL segment displays the local menu for the CPU-ETH3 controller itself.
The full CPU-ETH3 controller menu is shown beginning on page 31 .
The functionality of the four virtual pushbuttons is as follows:
[+] [–] Move up and down the menu when a parameter name is shown
Change to the next or previous value when a variable value is shown and change
has been enabled using the [SEL] button
[SEL] Gives access to the next menu level. When a parameter value is shown, pushing this
button once enables modification of the value using the [+] and [–] buttons; a
second push confirms the new value
[ESC] Cancels the effect of parameter value changes that have not been confirmed;
pushing [ESC] causes the parameter to revert to its former value.