Belden GRASS VALLEY DENSITE 3+ FR4, Руководство пользователя

Страница: 22 / 59

10
Installation
Mounting
Card adapters:
There are 3 different types of adapters that
can be used, depending on the Densité 2
card geometry:
o DENSITE 3-EXT-A
o DENSITE 3-EXT-B
o DENSITE 3-EXT-C
Install these on the Densité 2 card as
follows:
1 Fit the top edge of the card into the
holding slot along the bottom edge of
the adapter.
2 Align the holes in the top of the card with the holes on the adapter, and secure them
together with the two provided screws and lock washers, as shown in the figure.
Rear Adapters
3-RU rear panel adapters are available for Single and Double Densité 2 rear panels:
• DENSITE SRP-3RU for single slot-width rear panels
• DENSITE DRP-3RU for double slot-width rear panels
To install the adapter and the rear panel
1 Position the adapter at the top of the empty slot(s) on the rear of the frame.
2 Use the captive screw in the adapter to fasten it securely in position.
3 Slip the top of the 2RU rear panel into the slot on the bottom of the adapter, and secure the
panel to the frame using the captive screw at the bottom of the panel.